New Year Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 65pass65

Good News !!! 5V0-41.20 VMware SD-WAN Troubleshoot is now Stable and With Pass Result

5V0-41.20 Practice Exam Questions and Answers

VMware SD-WAN Troubleshoot

Last Update 4 days ago
Total Questions : 36

VMware SD-WAN Troubleshoot is stable now with all latest exam questions are added 4 days ago. Incorporating 5V0-41.20 practice exam questions into your study plan is more than just a preparation strategy.

5V0-41.20 exam questions often include scenarios and problem-solving exercises that mirror real-world challenges. Working through 5V0-41.20 dumps allows you to practice pacing yourself, ensuring that you can complete all VMware SD-WAN Troubleshoot practice test within the allotted time frame.

5V0-41.20 PDF

5V0-41.20 PDF (Printable)
$43.75
$124.99

5V0-41.20 Testing Engine

5V0-41.20 PDF (Printable)
$50.75
$144.99

5V0-41.20 PDF + Testing Engine

5V0-41.20 PDF (Printable)
$63.7
$181.99
Question # 1

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 1

When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.

What should the network administrator look for next to determine what the issue might be?

Options:

A.  

Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.

B.  

Check Test & Troubleshoot and review a route table dump of the NY hub site.

C.  

Check the Global Segment Configuration to see if it has the Routing Flag enabled.

D.  

Determine if OSPF has been configured on the MPLS Routers at the hub.

Discussion 0
Question # 2

Scenario 1:

A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.

Exhibit.

Question # 2

An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup.

What should the local technician check first when troubleshooting the issue?

Options:

A.  

Verify beep sequence of the Edge devices.

B.  

Review color of the LE

D.  

C.  

Review the Orchestrator for HA misconfiguration issues.

D.  

Verify the link light sequence of the HA ports.

Discussion 0
Question # 3

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Users at multiple branches complain that a highly performant SQL Database cluster residing at the New York Data Center is not responding to database queries or inserts as expected. It is affecting the order management site. A network administrator investigates and finds that traffic from the branches are going through Seattle to reach the SQL Cluster in New York. The design for this SD-WAN network does not call for routing security.

The SQL Cluster is reachable through either Data Center, but for performance reasons, must flow through the New York D

C.  

The network administrator has verified that the routes are not present in the OFC and the BGP neighborship is down in Network Services.

Refer to the Exhibit(s).

Exhibit.

Question # 3

Question # 3

What should the administrator verify?

Options:

A.  

The BGP configuration has a filter in place to deny the prefix in New York.

B.  

The BGP Authentication matches on both sides.

C.  

The BGP configuration has a filter in place to deny the prefix in Seattle.

D.  

Backhauling through the Seattle DC is disabled.

Discussion 0
Question # 4

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Question # 4

Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.

What should the administrator check next?

Options:

A.  

Verify if Path-MTU Discovery is disabled.

B.  

Verify if there is latency, loss, or jitter on the underlay.

C.  

Verify the Business Policy flows are matching.

D.  

Verify if routes to Gateways are present in the Overlay Flow Control (OFC).

Discussion 0
Question # 5

Scenario 1:

The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.

A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges

online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.

Refer to the Exhibit(s).

Question # 5

Question # 5

What is the cause of this issue?

Options:

A.  

The activation link did not specify the updated image location requiring the Edge to be re-activated.

B.  

The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.

C.  

The Edge will be offline for about 4 hours until it has completed the factory image installation.

D.  

The activation link contained incorrect configurations for WAN overlays and WAN interfaces.

Discussion 0
Question # 6

Scenario 2:

After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being cert configurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 6

A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide H

A.  

When configuring VRRP, the SD-WAN Edge service restarted.

What caused this behavior?

Options:

A.  

The administrator failed to specify the Edge Type as a VeloCloud Cluster.

B.  

This is an expected behavior.

C.  

The device is faulty and will need a replacement.

D.  

The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.

Discussion 0
Question # 7

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 7

The tunnel from spoke to hub is not coming up. What are the two possible reasons? (Choose two.)

Options:

A.  

Spoke Edge and hub Edge are two different Edge models.

B.  

Spoke Edge and hub Edge have a mismatch certificate authentication mode.

C.  

Hub WAN Interface might be behind the NAT Device or firewall.

D.  

Dynamic Branch to Branch is not enabled.

Discussion 0
Question # 8

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 8

Where can the network administrator check to see what routes are present on the London-site Edge?

Options:

A.  

Log into the VCO > Configuration > Overlay Flow Control

B.  

Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "List Paths"

C.  

Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "Route Table Dump"

D.  

Log into the VCO > Monitoring > Overlay Flow Control

Discussion 0
Question # 9

Scenario 2:

After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 9

After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.

How can this be prevented?

Options:

A.  

Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.

B.  

Segmentation is currently not supported on VeloCloud Edge.

C.  

Create two subnets, one for Guest wireless traffic and another one for Production traffic.

D.  

Have Guest wireless and Production traffic in the same segment but different VLANs.

Discussion 0
Question # 10

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Question # 10

Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.

What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)

Options:

A.  

Change the bandwidth measurement under WAN Overlay Advanced Settings.

B.  

Check underlay network (bandwidth, latency, jitter, packet loss).

C.  

Under Monitor, check Routing tab.

D.  

Review Business Policies configuration and match them against the business requirements.

Discussion 0
Get 5V0-41.20 dumps and pass your exam in 24 hours!

Free Exams Sample Questions